Product Features
Ultra-Slim Flat Design
Unique flat structure with an extremely low overall height — ideal for space-constrained dental milling and glass engraving machines, without interfering with machining travel.
0.001mm Repeatability
Precision contact-trigger design with 0.001mm repeatability, ensuring accurate and reliable tool length compensation after every tool change.
Tungsten Carbide Contact Surface
Contact surface made of tungsten carbide for high hardness and wear resistance. The 10mm diameter is optimized for dental small-diameter tools (0.3~6mm).
IP67 Ingress Protection
Fully sealed structure certified IP67, capable of withstanding continuous coolant splash — suitable for wet dental machining environments.
B Contact Output
Default N.C. switch (B contact) with LED indicator always on, turns off upon tool contact — broken wire detection for safe and reliable operation.
Stainless Steel Protected Cable
Cable sheathed in stainless steel protective conduit, oil-resistant and anti-interference, with a minimum bend radius of R7 for tight internal routing.
Application Scenarios
T10Z installed inside a dental milling machine
T10Z configuration in dental milling equipment
Specifications
| Specification Item | T10Z Value |
|---|---|
| Model | T10Z |
| Repeatability | 0.001 mm |
| Operating Voltage | DC 24V |
| Total Stroke | 2.5 mm |
| Overstroke | Yes (damage prevention) |
| Switch Type | Contact trigger type |
| Output Signal | Default B contact (N.C. switch) |
| Contact Surface Material | Tungsten Carbide |
| Contact Surface Diameter | 10 mm |
| Contact Force | 1.5 N |
| Contact Life | 3 million cycles |
| Cable Specification | Stainless steel protective conduit / Oil-resistant / Anti-interference / Min. bend radius R7 |
| Ingress Protection Rating | IP67 |
| LED Indicator | Default on / Turns off when triggered |
Catalog & Download
Download 3D models, 2D dimensional drawings, and product catalog for engineering evaluation
